TDA-5C 氣溶膠發生器

5C 氣溶膠發生器

TDA-5C氣溶膠發生器能產生一致的多種直徑分布的氣溶膠粒子，TDA-5C氣溶膠發生器與TDA-2G或TDA-2H等氣溶膠光度計配合使用時能提供足夠的挑戰粒子去測量高效過濾系統（流量范圍從500-65,000立方英尺/分鐘）.

TDA-5C氣溶膠發生器的油路保險供應系統和熱切換功能是目前安全的氣溶膠發生器.

TDA-5C Aerosol Generator
TDA-5C氣溶膠發生器/懸浮粒子發生器/產塵儀

TDA-5C氣溶膠發生器/懸浮粒子發生器/產塵儀簡介:
TDA-5C能產生一致的多種直徑分布的氣溶膠粒子，TDA-5C與TDA-2G或TDA-2H等光度計配合使用時能提供足夠的挑戰粒子去測量高效過濾系統（流量范圍從500-65,000立方英尺/分鐘）.
TDA-5C的油路保險供應系統和熱切換功能是目前安全的氣溶膠發生器.

TDA-5C 氣溶膠發生器/懸浮粒子發生器/產塵儀特點:
氣流范圍寬(500-65,000CFM)
濃度可調
大容量產塵(可連續4小時檢測)

TDA-5C 氣溶膠發生器/懸浮粒子發生器/產塵儀應用:
   潔凈房
   層流臺
   手套箱
   HEPA吸塵機
   HVAC系統
   HEPA過濾器
   手術室
   核子過濾系統
   科研

TDA-5C 氣溶膠發生器/懸浮粒子發生器/產塵儀介紹:
    TDA-5C能產生一致的多種直徑分布的空氣懸浮粒子，原理是通過加入一定量的氣溶膠原液體到一個大的熱的區間內，液體被蒸發出并被重新組合后，在僅僅5磅的壓力下，通過少量的惰性氣體送出，形成含有多種直徑的空氣懸浮粒子。TDA-5C能產生氣溶膠的功效與TDA-2G或TDA-2H等光度計配合使用時能提供足夠的挑戰粒子去測量高效過濾系統（流量范圍從500-65,000立方英尺/分鐘）。
    TDA-5C具有控制和顯示功能都在前面板。這是一個大容量的氣溶膠發生器，能連續操作4小時不需要重新填料。它的數字式的溫度控制允許操作員去設定在適宜的環境下為指定的懸浮粒子所需的溫度。
    TDA-5C 是一個熱發生的多用途便攜式的氣溶膠發生器.它是一個理想的對氣溶膠濃度或體積變動范圍要求很寬的場合.如大的潔凈室,或者在一些不能提供壓縮空氣的地方.TDA-5C為一些苛刻的行業應用提供了一個高容量的解決方案,象一獨立的過濾器測試,或商業應用上的核設施,醫藥制造,醫療設備應用及其它應用.要驗證潔凈房、測試高效過濾系統或個別過濾裝置時，TDA-5C是您的選擇。
    TDA-5C 氣溶膠發生器/懸浮粒子發生器/產塵儀技術參數:
     系統風量要求           1500 - 65,000立方英尺每分鐘(2547-110370立方米每小時)
    懸浮粒子濃度             10微克 / 升在 65,000 立方英尺每分鐘流量時
    懸浮粒子濃度            100微克 / 升在6,500立方英尺每分鐘時流量時
    產生類型                     蒸氣冷凝
    壓縮空氣                     不需要
    壓縮氣體(惰性氣體) 20立方英尺/小時在50psi 壓力下
    氣體類型                     多種直徑的粒子
    尺寸                             35cm X 25cm X 25cm (LXWXH)
    重量                             9.1 KG
    電源                             110 VAC / 60 Hz 或 220 VAC / 50hz

英文詳細介紹

Description
The 5C Aerosol Generator has been designed to provide operator convenience and improved performance. The 5C is ideal for certifying or testing HEPA filters or installations with air flows from 1,500 to 65,000 cfm. It requires an inert gas source and 115/230 volts @ 750 watts electrical service.

5C Features
The 5C has all controls and displays grouped on the front panel away from the aerosol generator output nozzle. The unit has a large aerosol liquid capacity for operation up to 4 hours at full output without refilling. In addition, its digital temperature control allows the operator to set the unit for optimum conditions for the specific aerosol agent being used.

The 5C is capable of generating a wide variety of aerosol concentrations by discharging a controlled quantity of oil into a large heated area. The liquid is vaporized and condensed into a polydispersed aerosol while in the presence of a small amount of nitrogen delivered at approximately five pounds of pressure. The efficiency at which the aerosol is produced enables the 5C Generator, when used in conjunction with Analog or Digital photometers, to provide enough aerosol to leak test filtration systems from 1,500 to 65,0000 cfm. Systems larger than 6,500 cfm may be tested for leaks at less than 100 micrograms per liter when the photometer sensitivity is increased.

5C Specifications
Aerosol Output Range: 1,500-65,000 cfm
Aerosol Concentration 100 ug/1@*: 6,500 cfm
Aerosol Concentration 10 ug/1@*: 65,000 cfm
Generator Type: Vapor Condensation
Compressed Air: Not Required
Compressed Gas: Nitrogen, Argon, Carbon Dioxide or Helium (*20 cfh @ 50 psi)
Aerosol Type: Polydispersed (Cold)
Size: 15" L × 9" W × 10" H
(38cm L × 23cm W × 25cm H)
Weight-Pounds (lbs): 23 lbs.
Weight-Kilograms (kg): 10.4 kg
Electrical: 115 VAC / 60 Hz or 230 VAC / 50hz

Compliance:

EN61000-6-2:2005

EN61000-6-4:2007

EN61010-1:2001

UL61010-1:2004

FCC Part 15 (7/2008) Class A

ICES-003 (CAN/CSA-CEI/IEC 22:02)

* For high volume output, more uniform particle size, and safety, the liquid is aerosolized, superheated to vapor then recondensed by ambient air into a cold poly-dispersed aerosol. The propellant must be an inert gas since the liquid vapor temperature is above the liquid flashpoint.