詢價
- 品牌/商標：NORGREN
- 企業類型：貿易商
- 原產地：英國
- -：-
B73G3BKQD1RMN，英國NORGREN減壓傳感器
），調壓閥R07-100-RNKG（G1/8，流量6.5，0.3-7Bar），R07-200-RNKG（G1/4，流量7.0，0.3-7Bar），過濾器F73G-2GN-QT3（G1/4，手動排水，濾芯40um），油霧器L73M-2GN-QTN（G1/4，手動排水），Norgren諾冠過濾調壓閥B73G-2GK-AT3-RMN（G1/4，自動排水，濾芯40um，0.3-10Bar），線圈QM/48/127/21（13J，24VDC，2W），QM/48/167/21（19J，220VAC，9/5.0VA），0246.024.00（HERION海隆，7W），3032.024.00（HERION海隆，2.7W），0800.230.50（HERION海隆，18/9VA），磁性開關M/50/LSU/2/V（干簧式，長2米），
Spark quenching with DC voltage (proposal)
1. Diode D in parallel to inductive load.
Observance of correct polarity (positive pole to cathode).
Dimensioning specifications for quenching diode:
Rated voltage at diode: UD ≥ 1.4 x UV
Selection of a quick switching diode (recovery time trr < [200] ms).
Rated current at diode: IR ≥ ILoad
2. RC link in parallel to load in parallel to switching contact.
Suited for DC abd AC voltage.These products are intended for use in industrial systems only. Do not
use these products where pressures and temperatures can exceed
those listed under ‘Technical Data’.
Before using these products with fluids other than those specified, for
non-industrial applications, life-support systems, or other applications
not within published specifications, consult Norgren.
Through misuse, age, or malfunction, components used in fluid power
systems can fail in various modes. The system designer is warned to
consider the failure modes of all component parts used in
fluid power systems and to provide adequate safeguards to prevent
personal injury or damage to equipment in the event of such a failure.
System designers must provide a warning to end users in the
system instruction manual if protection against a failure mode
cannot be adequately provided.
System designers and end users are cautioned to review specific
warnings found in instruction sheets packed and shipped with these
products where applicable.
），調壓閥R07-100-RNKG（G1/8，流量6.5，0.3-7Bar），R07-200-RNKG（G1/4，流量7.0，0.3-7Bar），過濾器F73G-2GN-QT3（G1/4，手動排水，濾芯40um），油霧器L73M-2GN-QTN（G1/4，手動排水），Norgren諾冠過濾調壓閥B73G-2GK-AT3-RMN（G1/4，自動排水，濾芯40um，0.3-10Bar），線圈QM/48/127/21（13J，24VDC，2W），QM/48/167/21（19J，220VAC，9/5.0VA），0246.024.00（HERION海隆，7W），3032.024.00（HERION海隆，2.7W），0800.230.50（HERION海隆，18/9VA），磁性開關M/50/LSU/2/V（干簧式，長2米），
Spark quenching with DC voltage (proposal)
1. Diode D in parallel to inductive load.
Observance of correct polarity (positive pole to cathode).
Dimensioning specifications for quenching diode:
Rated voltage at diode: UD ≥ 1.4 x UV
Selection of a quick switching diode (recovery time trr < [200] ms).
Rated current at diode: IR ≥ ILoad
2. RC link in parallel to load in parallel to switching contact.
Suited for DC abd AC voltage.These products are intended for use in industrial systems only. Do not
use these products where pressures and temperatures can exceed
those listed under ‘Technical Data’.
Before using these products with fluids other than those specified, for
non-industrial applications, life-support systems, or other applications
not within published specifications, consult Norgren.
Through misuse, age, or malfunction, components used in fluid power
systems can fail in various modes. The system designer is warned to
consider the failure modes of all component parts used in
fluid power systems and to provide adequate safeguards to prevent
personal injury or damage to equipment in the event of such a failure.
System designers must provide a warning to end users in the
system instruction manual if protection against a failure mode
cannot be adequately provided.
System designers and end users are cautioned to review specific
warnings found in instruction sheets packed and shipped with these
products where applicable.
