詢價
- 品牌/商標：BURKERT
- 企業類型：貿易商
- 原產地：德國
德國寶德6526型兩位五通電磁閥，BURKERT6526型電磁閥
潤滑、無油的干壓縮空氣；中性氣體
與MP 12配套的法蘭（參見圖）
DIN 43650 C型插座連接器
可根據需要安裝，但將執行機構朝上
Four conductivity sensors with different cell
constants (C = 0.01; 0.1; 1; 10) offer large capabilities
of conductivity measurement. The Pt1000
for automatic temperature compensation is
integrated in the sensor housing.
This sensor transmits directly an analog signal
via a 4 x 1.5 mm2 shielded cable, and is fitted
with a standard EN175301-803 plug connector
for the connection to remote conductivity
transmitter Type 8225 (maximal cable length of 10 m).
Compatibility With fittings S020 (see corresponding data sheet)
Stainless steel 1.4571 (316Ti)
FKM (EPDM included in delivery)
Electrode Stainless steel for cell constant C =0.01 or 0.1
Graphite for cell constant C =1.0 or 10
module Type 8225
Complete device data (fitting + sensor)
Pipe diameter DN 15 to 200
Conductivity measurement
0.05 μS/cm ... 200 mS/cm (depending on cell constant)
typical: 3% o. MV.* - max.: 5% o. MV.*
automatic (integrated Pt1000) - reference temperature 25°C
Medium temperature max.* With fitting in
PVC: 50°C (122°F) - PP: 80°C (176 °F) -
PVDF, stainless steel, brass: 100°C (212°F)
Fluid pressure max PN10 (see pressure / temperature chart)
* o. MV. = of measured value
潤滑、無油的干壓縮空氣；中性氣體
與MP 12配套的法蘭（參見圖）
DIN 43650 C型插座連接器
可根據需要安裝，但將執行機構朝上
Four conductivity sensors with different cell
constants (C = 0.01; 0.1; 1; 10) offer large capabilities
of conductivity measurement. The Pt1000
for automatic temperature compensation is
integrated in the sensor housing.
This sensor transmits directly an analog signal
via a 4 x 1.5 mm2 shielded cable, and is fitted
with a standard EN175301-803 plug connector
for the connection to remote conductivity
transmitter Type 8225 (maximal cable length of 10 m).
Compatibility With fittings S020 (see corresponding data sheet)
Stainless steel 1.4571 (316Ti)
FKM (EPDM included in delivery)
Electrode Stainless steel for cell constant C =0.01 or 0.1
Graphite for cell constant C =1.0 or 10
module Type 8225
Complete device data (fitting + sensor)
Pipe diameter DN 15 to 200
Conductivity measurement
0.05 μS/cm ... 200 mS/cm (depending on cell constant)
typical: 3% o. MV.* - max.: 5% o. MV.*
automatic (integrated Pt1000) - reference temperature 25°C
Medium temperature max.* With fitting in
PVC: 50°C (122°F) - PP: 80°C (176 °F) -
PVDF, stainless steel, brass: 100°C (212°F)
Fluid pressure max PN10 (see pressure / temperature chart)
* o. MV. = of measured value
