詢價
- 企業類型：貿易商
- 新舊程度：全新
- 原產地：日本
基本型SMC無桿氣缸工作原理
產品描述：
無桿氣缸如果操作所在的動能超過允許值時，這可能會損壞 內部零件及導致產品故障。
請?zhí)貏e注意動能 各級設計和操作過程中避免超出允許的極。
注2）以上的值表示轉動開始和所造成的減速度之間的時間 減震器。
雖然通過旋轉臺所需要的時間，以達到后的轉動端 減速的不同而不同的操作條件
（負荷，旋轉的慣性力矩 速度和操作壓力），約0.2?2秒是必需的。的范圍 角度減震器工作在其中是旋轉端與值之間 如下所示。
無桿氣缸英文資料：
3. When rotation of the rotary table with internal shock absorber
is set at a value smaller than the table below, the piston stroke
becomes smaller than the shock absorber's effective stroke
and energy absorption capacity decreases.
1. When operating at high speed with a large load
weight, a large amount of energy is applied to the
actuator and can cause damage.
Refer to the model selection on page 20 to find the proper
2. Do not machine the fixed orifice of the port to
enlarge its size. If the fixed orifice size is enlarged,
As a standard feature, the rotary table is equipped with a
rotation adjustment screw (adjustment bolt or shock absorber)
that can be used to adjust the rotation. The table below shows
the rotation adjustment per single rotation of the rotation
5. Shock absorbers are consumable parts. When a decrease in
energy absorption capacity is noticed, it must be replaced.
4. Products with shock absorber are not designed to smooth stop
but to absorb the kinetic energy of the load. If the load has to
be stopped smoothly, a shock absorber of the optimum size
meeting the operating conditions must be installed external to
基本型SMC無桿氣缸工作原理
