優質 小量程PVF 2-11薄膜傳感器適用電荷轉換器CI-50-0.01

1.  電荷轉換器CI-50-0.1 or CI-50-0.01介紹

電荷轉換器是簡單的無電感被動設備，用于壓電型壓力傳感器，可以生成直接準確的相互作用沖擊波的波形。CI-50-0.1電荷轉換器使用任何一個壓力范圍過0-100Kbar的PVF2傳感器，具有以2×10^-8秒響應時間產生直接波形的轉換能力。

每個傳感器范圍的直接輸出電荷可以用該傳感器的電容（0.1微法拉）乘以測量轉換器的輸出電壓來獲得，從而用壓電薄膜傳感器刻度推測壓力狀態。

   CI-50-0.01適用于低壓。

2.  電荷轉換器CI-50-0.1 or CI-50-0.01圖片

3. 電荷轉換器CI-50-0.1 or CI-50-0.01尺寸圖

4. 電荷轉換器CI-50-0.1 or CI-50-0.01詳細參數

Piezofilm Converter – For use @ pressures below 0.1kb. Charge and integrators are simple non-inductive pive devices that can be used with piezoelectric stress gauges and are capable of yielding direct and accurate wave forms of the interacting shock waves. Our CI-50-0.1 charge integrator is a general purpose converter capable of yielding direct wave profiles with time resolution of 20 nanoseconds. using any size PVF 2 sensor over a 0-300 Kbars stress range. A direct output charge per unit area of the gauge can be obtained by multiplying its capacity (0.1 microfarad) by the measured converter’s output voltage and thus, inferred into a state of stress using the piezofilm gauge’s calibration. Our Model CI-50-0.01 is for very low pressure applications only. Please consult our technical staff prior to ordering.

5. 電荷轉換器CI-50-0.1 or CI-50-0.01連接方式