9METRE SYSTEM--5mm前置器8mmPROXIMITY SENSOR傳感器萬瓏電氣

系統廣泛應用于電力、石油、化工、冶金等行業和一些科研單位。對汽輪機、水輪機、鼓風機、壓縮機、空分機、齒輪箱、大型冷卻泵等大型旋轉機械軸的徑向振動、軸向位移、鍵相器、軸轉速、脹差、偏心、以及轉子動力學研究和零件尺寸檢驗等進行在線測量和保護。振動傳感器，探頭規格及線性量程: Φ3(0.5～０.８mm)、Φ4(1mm) Φ5(2mm)、Φ8(2mm)、 Φ10(3mm)、Φ11(4mm)、Φ14(4或5mm)、Φ16(6或７mm) Φ18(8mm)、Φ22(10mm) Φ25(12.７mm)、Φ32(12或14或16mm)、Φ36(18或20mm)  Φ50(25mm)■-24V供電:-4~20V、-2～-18V輸出 ±12~15V供電:0-5V、0~10V、-5～5V   -10~+10V輸出。+24V供電:4-20mA、  1-5V輸出。Φ8mm一體化電渦流位移/振動傳感器和Φ11mm一體化電渦流位移傳感器，前置器內置，它在大多數機械監測中應用于徑向振動、軸向位移和偏心測量，使用、安裝方便，有多種螺紋尺寸、規格選擇。能靜態和動態地非接觸、高線性度、高分辨力地測量被測金屬導體距探頭表面的距離。它是一種非接觸的線性化計量工具。電渦流傳感器能準確測量被測體（必須是金屬導體）與探頭端面之間靜態和動態的相對位移變化。在高速旋轉機械和往復式運動機械的狀態分析，振動研究、分析測量中，對非接觸的高精度振動、位移信號，能連續準確地采集到轉子振動狀態的多種參數。如軸的徑向振動、振幅以及軸向位置。在所有與機械狀態有關的故障征兆中，機械振動測量這是因?yàn)樗瑫r(shí)含有幅值、相位和頻率的信息。機械振動測量占有優勢的另一個原因是：它能反應出機械所有的損壞，并易于測量。從轉子動力學、軸承學的理論上分析，大型旋轉機械的運動狀態，主要取決于其核心—轉軸，而電渦流傳感器，能直接非接觸測量轉軸的狀態，對諸如轉子的不平衡、不對中、軸承磨損、軸裂紋及發生摩擦等機械問題的早期判定，可提供關鍵的信息。電渦流傳感器以其長期工作可靠性好、測量范圍寬、靈敏度高、分辨率高、響應速度快、抗干擾力強、不受油污等介質的影響、結構簡單等優點，在大型旋轉機械狀態的在線監測與故障診斷中得到廣泛應用。傳感器規格有: 
-24VDC供電-2—-18VDC或-4—-20VDC輸出； 
+24VDC供電4——20mA輸出，1--5VDC輸出; 
+-15VDC供電0—5VDC,-5—+5VDC，-10—+10VDC輸出，系統3mm;5mm;8mm;11mm;16mm;18mm;22mm;25mm;36mm;50mm;60mm等等各種探頭、延伸電纜和 前置器組成. 
20V/mm~0.32V/mm的輸出使系統的線性范圍達0.1~65mm,由于具有這樣的線性范圍,可廣泛應用于往復式和旋轉式機械的振動、位移測量.較小的面積效應和寬廣的頻率響應,也可用于轉速和鍵相等測量

Configuration:? Total Length and Mounting Option: 5 Meters System Length, Panel Mount
? Agency Approval Option: Not Required
The GE / Bently 3300 XL 5/8mm Proximitor Sensor is compatible with all 5 and 8 mm 3300 and 3300 XL probes. The 3300 XL Proximitor Sensor incorporates numerous improvements over previous designs. Its physical packaging allows you to use it in high-density DINrail installations. You can also mount the sensor in a traditional panel mount configuration, where it shares an identical 4-hole mounting "footprint" with older Proximitor Sensor designs. The mounting base for either option provides electrical isolation and eliminates the need for separate isolator plates.
Part Number: 330180-51-05 

GE / Bently Nevada 3300 XL 8mm Proximity Transducer System

Features Ideal for Compression Systems, Speed Measurements, and Fluid-Film Bearing Machines

Extended Temperature Range Applications

Complete Interchangeability of Units and Cabling

Backwards Compatible with Other Non-3300 XL Series Transducer System ComponentsDescription

The GE / Bently Nevada 3300 XL 8mm Proximity Transducer System consists of one 3300 XL 8mm probe, one 3300 XL extension cable, and one 3300 XL Proximitor Sensor. The system provides an output voltage that is directly proportional to the distance between the probe tip and the observed conductive surface and can measure both static (position) and dynamic (vibration) values. The system's primary applications are vibration and position measurements on fluid-film bearing machines, as well as Keyphasor reference and speed measurements. The standard 3300 XL 8 mm 5-meter system also fully complies with the American Petroleum Institute's (API) 670 Standard (4th Edition) for mechanical configuration, linear range, accuracy, and temperature stability. All 3300 XL 8 mm proximity transducer systems provide this level of performance and support complete interchangeability of probes, extension cables, and Proximitor sensors, eliminating the need to match or bench calibrate individual components. 
Each 3300 XL 8 mm Transducer System component is backward-compatible and interchangeable with other non-XL 3300 series 5 mm and 8 mm transducer system components. This compatibility includes the 3300 5 mm probe, for applications in which an 8 mm probe is too large for the available mounting space.3300XL Proximitor Sensor Part Number Breakdown (Not included when sold from Artisan unless specified)
330180-AXX-BXXA: Total Length and Mounting Option
1 0: 1.0 metre (3.3 feet) system length, panel mount
1 1: 1.0 metre (3.3 feet) system length, DIN mount
1 2: 1.0 metre (3.3 feet) system length, no mounting hardware
5 0: 5.0 metre (16.4 feet) system length, panel mount
5 1: 5.0 metre (16.4 feet) system length, DIN mount
5 2: 5.0 metre (16.4 feet) system length, no mounting hardware
9 0: 9.0 metres (29.5 feet) system length, panel mount
9 1: 9.0 metres (29.5 feet) system length, DIN mount
9 2: 9.0 metres (29.5 feet) system length, no mounting hardware
B: Agency Approval Option0 0: Not required0 5: Multiple approvals

Product Family: 3300 XL, 3300XL, 3300-XL

Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if