儀器簡介：
Rotomill 15/24 - Variable Speed Two-Roll Mill
All-electric machine
Small footprint
Variable speed
Extremely durable
Wide materials processing range
Cored rolls
技術參數：
Specification:
Machine Specification * Imperial Metric
Roll Diameter 5.9 in 150 mm
Roll Width 9.5 in 240 mm
Min Gap Between Rolls 0.02 in 0.5 mm
Max Gap Between Rolls 0.59 in 15.0 mm
Min Front Roll Speed 10 RPM
Max Front Roll Speed 45 RPM
Min Back Roll Speed 10 RPM
Max Back Roll Speed 45 RPM
Voltage Requirements 415V – Three Phase – 60 Hz
主要特點：
Rotomill 15/24 - Variable Speed Two-Roll Mill
The ruggedly built Rotomill 15/24 is an all-electric variable speed two-roll mill. The Rotomill has an adjustable nip and accomodates a wide range of plastic materials. This mill uses individually driven, chrome-plated carbon steel rolls – cored for heating and cooling. Heavy duty roller bearings and other production-oriented construction considerations ensure this machine's extreme durability.
Construction:
Rolls: High-strength carbon steel rolls; chrome plated and precision
ground. Individually heated.
Bearings: Rolls mounted on heavy-duty, high temperature rated roller
bearings equipped with high temperature seals.
Drive: Completely enclosed AC drive motors with infinitely variable
speed. Each rotor is independently driven with heavy-duty
reduction gearboxes and duplex chain drives. Flux vector
constant torque inverter drives.
Base: Heavy duty steel base - welded and painted.
Controls: Control panel integrating Start/stop, individual roll
speed settings, master speed control, individual roll
temperature settings, and emergency stop.
Temperature Control: Electric Band Heaters (0 to 300°C) with fuzzy
logic PID control. Type J thermocouples with
solid state switching.
Safety: Moving components are fully guarded. Includes electrical
interlock to prevent operation when guard is open.
Rotomill 15/24 - Variable Speed Two-Roll Mill
All-electric machine
Small footprint
Variable speed
Extremely durable
Wide materials processing range
Cored rolls
技術參數：
Specification:
Machine Specification * Imperial Metric
Roll Diameter 5.9 in 150 mm
Roll Width 9.5 in 240 mm
Min Gap Between Rolls 0.02 in 0.5 mm
Max Gap Between Rolls 0.59 in 15.0 mm
Min Front Roll Speed 10 RPM
Max Front Roll Speed 45 RPM
Min Back Roll Speed 10 RPM
Max Back Roll Speed 45 RPM
Voltage Requirements 415V – Three Phase – 60 Hz
主要特點：
Rotomill 15/24 - Variable Speed Two-Roll Mill
The ruggedly built Rotomill 15/24 is an all-electric variable speed two-roll mill. The Rotomill has an adjustable nip and accomodates a wide range of plastic materials. This mill uses individually driven, chrome-plated carbon steel rolls – cored for heating and cooling. Heavy duty roller bearings and other production-oriented construction considerations ensure this machine's extreme durability.
Construction:
Rolls: High-strength carbon steel rolls; chrome plated and precision
ground. Individually heated.
Bearings: Rolls mounted on heavy-duty, high temperature rated roller
bearings equipped with high temperature seals.
Drive: Completely enclosed AC drive motors with infinitely variable
speed. Each rotor is independently driven with heavy-duty
reduction gearboxes and duplex chain drives. Flux vector
constant torque inverter drives.
Base: Heavy duty steel base - welded and painted.
Controls: Control panel integrating Start/stop, individual roll
speed settings, master speed control, individual roll
temperature settings, and emergency stop.
Temperature Control: Electric Band Heaters (0 to 300°C) with fuzzy
logic PID control. Type J thermocouples with
solid state switching.
Safety: Moving components are fully guarded. Includes electrical
interlock to prevent operation when guard is open.
