產品型號：

PM6304A、PM6306A

中賽儀器庫存大量各種高頻儀器現貨特價出售中--本公司長期現金大量高價回收各種高頻儀器;如-網絡分析儀-視/ 音頻分析儀-信號發生器-頻譜分析儀-手機綜合測試儀 阻抗分析儀 LCR電橋 示波器 高壓測試儀 靜電放電發生器等等…..儀器聯糸人；張彬11/電話；傳真； 選用二手測量儀器的優勢是：
1、與新購儀器幾個月的供貨期相比，購買二手儀器的供貨期要短的多。在 時間就是市場的今天，優勢無疑是為明顯的。
2、二手儀器的價格便宜，基本為新購儀器價格的20%～50%。在電子技術迅 速發展的今天，儀器的更新也在加快，投資越少則風險越小。
3、為了讓您放心地使用我們提供的二手儀器，我們銷售的二手儀器可以做到：
1、保修半年至一年不等。
2、可以根據您的要求，將儀器送至計量測試單位進行校準。Testing passive electronic components is much easier with RCL meters from Fluke. Just connect your component to the test fixture and in less than a second, you'll see all you need to know on a large, easy to read LCD display. The Fluke accessories for SMD testing allow fast, convenient and accurate characterization of SMD components.
Choose the instrument model that best meets your performance and budget requirements.

PM 6303A
The PM 6303A is quick and simple to operate, on the manufacturing floor as a quality assurance tool or in the service lab for quick tests of a wide variety of components. Its simple operation and 0.25 % basic accuracy make the PM 6303A equally at home in the classroom for education and training environments.

PM 6304
If you want a user-friendly instrument and remote programmability, consider the Fluke PM 6304 RCL meter. The PM 6304 has a basic accuracy of 0.1 0/s, 3 test voltage levels, and 204 test frequencies up to 100 kHz.

PM 6306
The PM 6306 is the most flexible RCL meter and allows testing with any frequency up to 1 MHz. The AC and DC test voltages are continuously adjustable and the instrument offers a built-in contact check to ensure optimum connection. With these capabilities, you can handle a wider variety of components and under more realistic test conditions.

• Easy to use, at-a-glance display
• Computer-aided component testing
• Component Binning RS-232 or IEEE-488 interfaces
• Internal or external bias
• DC test measurement option
• Nine front panel set-ups
• Actual component test voltage/current readback
• Automatic zero trimming
• Contact check and deviation mode (PM 6306 only)
• Front panel test posts for immediate 4-wire measurements