- 品牌/商標:wenglor
- 企業類型:制造商
- 原產地:德國
產品特征為:到2微米的測量;與距離曾比例的模擬(電壓、電流)或數字量輸出;CP系列采用了先進的CMOS技術;在不同顏色、材質和表層特性情況下也能保持高和高準確性;可實現動態高度和厚度檢測。
廣泛的應用:厚度、高度和距離的檢測;靜態和動態的差值廁量;震動測量;輪廓測量;檢測雙層材料、深色、橡膠材質、不規則表面物體的測量。
技術參數:
Optical Data
| Working Range | 30...80 mm |
| Measuring Range | 50 mm |
| Resolution | < 8 μm |
| Resolution (Speed-Mode) | < 12 μm |
| Linearity | 0,1 % |
| Linearity (Speed-Mode) | 0,2 % |
| Light Source | Laser (red) |
| Wave Length | 660 nm |
| Service Life (T = +25 °C) | 100000 h |
| Laser Class (EN 60825-1) | 2 |
| Max. Ambient Light | 10000 Lux |
| Light Spot Diameter | see Table 1 |
| Supply Voltage | 18...30 V DC |
| Current Consumption (Ub = 24 V) | < 80 mA |
| Measurement Rate | 1500 /s |
| Measurement Rate (Resolution-Mode) | 600 /s |
| Response Time | < 660 μs |
| Response Time (Resolution Mode) | < 1660 μs |
| Temperature Drift | < 5 μm/K |
| Temperature Range | -25...50 °C |
| Analog Output | 0...10 V / 4...20 mA |
| Current Load Voltage Output | < 1 mA |
| Current Output Load Resistance | < 500 Ohm |
| Interface | RS-232 |
| Baud Rate | 38400 Bd |
| Protection Class | III |





