將該檢測器汽車點煙器口,用于測量汽車電瓶工作狀況，當打開汽車鑰匙未啟動發動機時,該檢測器顯示值正常在12V左右;當啟動后汽車電瓶開始充電,該檢測器顯示值應為13V～15V之間，此時可或行駛。
This battery meter is designed to measure the battery condition by plugging it in cigarette lighting socket. Before igniting the engine, the meter shows 12 v on the screen. As the engine is ignited, 13 v ~ 15 v should appear on the screen, indicating it is in normal operating condition.
當汽車發動不著時，該檢測器顯示值低于10V,則表示dianping電量嚴重不足，此時應及時充電或更換電瓶，車輛啟動后將自動給電瓶充電，約一個小時后，即可正常使用電瓶啟動車輛。
If an engine fails to ignite, the meter will display 10 v or less on screen. It is then necessary to recharge, or replace the battery. After the engine runs about one hour charging the battery, it is back to operating condition.
說明:
該電瓶電壓檢測器適用于12-24V汽車點煙器插口。
該產品內置0.5A熔斷管。若無顯示時，請擰開檢測器頭部，檢查玻璃熔斷管是否熔斷，若熔斷，請更換相同規格的熔斷管。
Note:
l The battery meter is applicable for 12 v ~24 v car cigarette socket.
l The meter is 0.5 A fused. If there is no display, unscrew the meter connector to check the fuse. Replace the fuse when necessary.
北京環球?qū)崢I(yè)股份有限公司
免企業未認證證營業執照未上傳
掃一掃
進入手機店鋪
