德國VOGEL/Würth伍爾特/GEDORE硬度計V651600-蘇州德魯夫代理

便攜式金屬硬度測試儀，

可快速測量，

多種測量單位可調(diào)，洛氏，布氏，邵氏。。

適用于大多數(shù)金屬硬度檢測，

測量范圍廣泛。

可任意角度測量，

配有RS232接口

德國原裝進(jìn)口

 Service and Maintenance
(1) 651600 must be kept from collisions, drop, liquid, dust, moisture, grease, high temperature and
strong magnetic fields.
(2) After testing, the probe head should be released in order to avoid the spring to deformate due to a
long term compression.
(3) After 500-800 tests, remove the support ring and take off the probe head. Use a soft brush to gently
clean the pipe and probe head. It is not allowed to use a lubricant during cleaning.
(4) When performing the calibration test, if the test result is quite different from that of the standard
block, please check the probe head. If the probe ball is severely damaged, please replace the probe
ball.
(5) If you do not use the tester for a long time, please take out the battery from the tester.
(6) If the tester has a problem which remains unsolved, please do not disassemble the tester yourself.
Please contact Vogel Germany as soon as possible.
(7) You must carry out the calibration test periodically in order to eliminate test errors